Tel: +86-731-2250-1931 |
Fax: +86-731-2250-1953 |
Email: sales@hixtec.com |
Mobile: +86-133-4253-0031 |
Contact: Daniel.Lee |
KM-86104 (WC-10%Co-4%Cr ) |
Total C: |
5.2~ 5.5% |
Free C: |
<0.05% |
Co: |
9.5~ 10.5% |
Cr: |
3.5~ 4.5% |
Fe: |
<0.15% |
W: |
Balance |
Particle Size Ranges: | -38/+10um; -45/+15um; -53/+15um; -53/+20um |
Apparent Density: | > 5.0 g/cc |
Hall Flow Rate: | <12 s/50g |
The offshore, marine and chemical industries on such components as pump sleeves, seal areas, compressor rods, ball valves, gate valves and rolls in the paper industry. |
KM-8812 (WC-120%Co ) |
Total C: |
5.3~ 5.5% |
Free C: |
<0.05% |
Co: |
11.5~ 12.5% |
Fe: |
<0.15% |
W:: |
Balance |
Particle Size Ranges: | -38/+10um; -45/+15um; -53/+15um; -53/+20um |
Apparent Density: | > 5.0 g/cc |
Hall Flow Rate: | <12 s/50g |
The offshore, marine and chemical industries on such components as pump sleeves, seal areas, compressor rods, ball valves, gate valves and rolls in the paper industry. |
KM-7525H ( 25NiCr/Cr3C2 ) |
KM-8020H ( 20NiCr/Cr3C2 ) |
Particle Size Ranges: | -38/+10um; -45/+15um; -53/+15um; -53/+20um |
Apparent Density: | > 2.1 g/cc |
Hall Flow Rate: | <35 s/50g |
Excellent for high temperature cavitation, abrasion and sliding wear Very good hot gas and corrosion resistance Used up to 870℃ Usee for Valve Stems, Trubine Components, fuel rod mandrels etc. |